Bose Universal Remote Device Codes: Our article today will be based on the Bose Soundbar Universal Remote codes and how to program them through the 3 famous methods. If you are using the Bose Soundbar, you will now be able to control it will the Universal Remote of your choice. We are going to discuss how to program the Bose Soundbar remote control and also provide all the codes needed during the programming. If you are ready, just follow the steps for programming that will be discussed shortly.
Check these links:
1. Tao Tronics Soundbar Universal Remote Codes & Guides.
2. Craig Soundbar Universal Remote Codes & Guides.
Table of Contents
The 4 Digits Codes for Bose Soundbar Universal Remote Control
Here are the 4 digit codes created for Bose Soundbar Universal Remote Control:
• 3741
• 1960
• 1280
• 1229
• 1256
• 0666
The 5 Digits Codes for Bose Soundbar Universal Remote Control
Here are the 5 digits created for Bose Soundbar Universal Remote Control:
• 30189
• 31933
• 31517
• 31934
• 31935
• 11144
• 20752
• 01982
• 31229
Ge Universal Code for Bose Soundbar Universal Remote
• 01885
• 00027
The Methods for Programming Bose Soundbar Universal Remote Control
It is time to discuss the various method you can use to program your Bose Soundbar Universal Remote. These methods will work with your device if you apply them correctly. Before I present any of the methods, I want you to take note that you have to go to Bose’s system Menu to change the settings so that it can receive Infrared.
How You Should Program Bose Soundbar Remote Control without Codes
If you don’t want to use code for programming your Bose Soundbar Remote control with a device, you can follow this simple method to achieve your goal. This method involves the scanning of codes in your remote control one after the other until the correct one is finally detected. Apply these instructions given below:
• Turn on your device e.g. your TV device.
• Turn on your Bose Soundbar Universal Remote and tap on the TV button for 3 seconds until the LED indicates that your remote is ready to be programmed.
• Point your remote to the TV or the device you are working on and then press the CH+ and CH- buttons. The remote will then show on and off signals.
• You can now press the up or down buttons continuously and then stop as soon as your device turns off.
• Verify your new code by clicking the power button. Your device should turn off after this action is carried out. Then try changing the channel via your remote to test if the code is programmed correctly.
• Tap your TV or device button on the remote to save the code. An LED light will blink two times indicating that your code is now stored.
How You Should Program Bose Soundbar Remote Control using Manual Method
You can achieve this with the use of keycode. The keycode is usually provided in the remote’s instruction booklet. The keycode helps to find the make and model of your device and thereby providing the actual code needed.
How do you go about this? Here are the instructions to follow:
• Turn on your device first to get it ready for the program.
• Press the TV button on the remote control you are using.
• Press and hold the setup button on your universal remote. In this case, the Bose Soundbar Universal Remote until the flashlight indicates that it is ready to be programmed.
• Enter the code given in your remote’s control instruction manual.
• Point your remote to your TV and then press and hold the power button.
• Release the power button immediately after you notice the device screen turns off.
How You Should Program Bose Soundbar Remote Control with Code Search
This method may take an additional time but it is effective for searching your codes automatically. The unique 3 digit code 9 9 1 code is always behind the reason why your Universal Remote Control is forced to auto search codes for you to program your devices. The steps involved are listed below:
• Turn on your device as the first step. In this case, we are turning on your TV.
• You can then press and hold the setup button on your remote.
• Enter the 3 digit code which is 9 9 1 by pointing the remote to your device.
• Hold down the power button on your remote and press the channel up button until your TV as a device is turned off.
If your TV responds, that means, your remote and the device are now connected properly. You can now enjoy using your Bose Soundbar Remote Control on your TV anytime, any moment.
Conclusion
If you have been searching for a way to program your Universal Remote, you are already in the right place. You can now search for more and more codes and Instructions needed for programming your remote control and devices.
No Responses