Sony Cable Box Universal Remote Codes

Sony Cable Box Universal Remote Codes? Today, I will be talking about the Sony Box Universal Remote Codes. I will not only list the codes you need to set up  your Sony Box Universal Remote, but will also discuss the methods that are involved in programming these codes so that they can work with your desired device. I hope you will learn these tricks and apply them successfully. Are you ready? Here are the codes and the various brands already:

Important Links:
Sony Blu Ray Player Remote Control Codes.

Cable Box & SAT Universal Remote Codes and Guides.

How do you Program Sony Universal Remote Without Codes

Now that I have successfully listed the codes and the various brands, it is time to begin to explore the different methods that are available for you to program your universal remote to work with the code and as a result, benefits your selected device.

This method involves the programming without codes and it is a process that features scanning of the codes one after the other until the correct one is detected and used. If you are ready to work with this method, here are the instructions below:

Switch on your smart device such as TV. That’s the first step you should always carry out in this method.

Then, turn on the universal remote selected. In this case, we are using the Sony Cable Box Universal remote. Tap on the corresponding device button on your remote. E.g. TV for TV, DVD for DVD, and so on and that should last for 3 seconds.

You will see an LED light, indicating that the remote is now in the learning mode.

Point your universal remote to the selected device and then click on the CH+ and CH- button. Press the up or down key frequently until the device turns off.

You can now verify the code  by clicking on the power button on your remote. The device is expected to turn on after this action. If it happened that it turned on, then, change the channel to confirm that your remote is correctly programmed to your device.

Lastly, tap on the corresponding device button to save the code. If an LED light blinks two times, it means the selected code is now stored.

How do you Program Sony Universal Remote With Manual Method

We normally use keycode to configure our universal remote. We use the keycode to identify the make and model of your device or equipment. The steps are also as simple as the first method.

Switch on your device selected first.

If it is TV, press the corresponding device button on your Sony Cable Box Universal Remote.

Press and hold the Setup button on your universal remote untol it displays a flash light that indicates that it is now in the learning mode.

Enter the keycode collected from the instruction manual that comes with your remote. 

If this is done correctly, point the remote to the selected device and then press and hold the power button.

After that, release the button if the screen of your device in this case TV switches off.

After this step, it is sure that your TV or the desired device will work. If it doesn work, you can repeat the same process using different code.

How do you Program Sony Universal Remote With Code Search

You can as well search for the correct code using the code search method. This method is actually called the manual method. It is a method that forces the remote into search mode by entering a 3 digit code assigned to do so universally.

Turn on the device

Press and hold the remote setup button

Enter the 991 code provided.

Hold down the power button on your remote and then press the channel up until the selected device turns off.

This method above takes some extra time but it is highly beneficial when searching for your device code. All you need to do properly is follow the procedures properly.

The methods mentioned above are the methods you can use to program your Sony Cable Box Universal Remotes so that they can work with the corresponding devices at anytime any moment.