Durabrand TV Universal Remote Codes & Program Instructions: Universal remote controls are used to control various devices such as televisions, sound systems, set-top boxes, and audio/video equipment. There are different types of universal remote controls for each brand. The codes must be entered into the remote to control.
You don’t need to worry about the codes not supporting your remote while trying to program with your durabrand tv remote. Just keep on changing the codes if the codes don’t support your remote while programming with your durabrand tv remote. Check these codes:
Table of Contents
4 Digit Universal Remote Codes for Durabrand TV
- 1109
- 0154
- 0236
- 0003
- 0171
- 0463
- 0178
- 0180
- 0493
- 1038
- 1046
- 1034
- 0003
- 0623
- 1047
List of Durabrand Surround Sound Remote Codes
- 0776
- 1089
- 1090
- 0449
- 0405
Examples of Durabrand TV Codes For Directv Remote
- 10171
- 10178
RCA Universal Remote Codes For Durabrand TV
1038, 1004
GE & One-For-All Universal Remote Codes For Durabrand TV
0254, 0458, 0217, 0189, 0135, 0157, 0153
Philips Universal Remote Codes For Durabrand TV
0027, 0447, 0323, 0520, 0115, 0317, 0916
How to Program your Duraband TV Universal Remote Control without Code
You can program your remote without the codes by following a few steps of the programming procedure. The procedure is easy, efficient and direct. In this method, your remote will scan the codes one after another until it finds the right code to work with.
- Switch on your Device e.g. TV so you can operate it.
- Turn on your remote control and tap on the device button on it e.g. TV, DVD, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
- Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
- Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
- Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Program your Duraband TV Universal Remote Control with Manual Method
The key code method of programming your remote is called the manual method. The key code is input using the remote control’s keypad. It is located in the instruction manual for your remote.
- Turn on your device, e.g. TV.
- Press the TV button on your Duraband TV Player Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided keycode in your remote’s instruction manual.
- After that, point the remote control at your selected device and press and hold the power button.
- Release the power button as soon as the screen switches off.
How to Program your Duraband TV Universal Remote Control with Code Search method
The code search method causes your remote to automatically search for the correct code as long as you type in the code with the proper number of digits. Precisely, 3 digit code.
- Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Hold on the power button on your remote and press the channel up button until the device or TV is turns off.
This method takes extra time to program compared to the first two methods discussed above.
