Dynex Universal Remote Codes & Program Instructions: Did you just acquire your Dynex TV recently? We have some codes for you to configure your Universal Remotes for Dynex TV.
We also have three methods of configuring your Universal Remote in case you are interested. The methods are Keycode, Code search, and Manual Search.
Check the list of codes below to see which will work with your Dynex TV and also, check the 3 methods to see the most suitable one for you.
Table of Contents
Dynex Universal Remote Codes List
| Remote Brand | Codes |
| Charter DIGITAL | 0463 |
| Comcast M1057 | 0463, 10463, 096 |
| Cox COX | 0463 |
| Direct TV RC23 | 10463 |
| Dish Network VIP508 | 720 |
| Dish Network VIP622 | 720 |
| Motorola DRC800 | 0463 |
| One for All URC-6690 | 0464 |
| Phillips | 115 |
| RCA RCU807 | 135 |
| Rogers DCT3250 | 0463 |
| Shaw DCT3416 | 0463 |
| Sony RM-VL600 | 8043 |
| TiVo HD | 0091 |
| TiVo SERIES 3 | 091 |
| CableVision UR2-CBL-CV04 | 096 |
Test these codes:
- 0177
- 0185
- 0282
- 0039
- 0280
- 0178
- 0179
- 0019
- 0236
- 0463
- 0180
- 0038
- 0154
- 0623
Dynex 4 Digit Universal Remote Codes
2049, 2184, 2891, 1040, 1181, 3161, 0371, 1171, 0135, 1718, 0115, 5421, 1463, 5311, 3141
Dynex 5 Digit Universal Remote Codes
10154, 10236, 10463, 12049, 12184, 11463, 11631, 13700, 18924, 13153, 11435, 11780, 11785, 11810, 12288, 10623, 11963, 10096, 10180, 10178, 10171, 10463
Dynex 3 Digit Universal Remote Codes
720, 001, 538, 583, 585, 701, 706, 698, 726, 500, 220, 908, 587, 333, 603, 221, 120, 650, 844, 724, 200, 115, 503, 666, 800, 533, 834, 632, 256
GE Universal Remote Codes For Dynex TV
3141, 5311, 3161, 2891, 6521, 0371
RCA Universal Remote Codes For Dynex TV
32596, 12049
Philips Universal Remote Codes Dynex
115
How to Configure Dynex Universal Remote with Auto Search
In the auto search method, you scan all of the remote’s possible codes one by one to see which ones work correctly with your TV.
- Switch on your Device e.g. TV so you can operate it.
- Turn on your remote control and tap on the device button on it e.g. TV, DVD, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
- Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
- Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
- Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Configure Dynex Universal Remote with Manual Search
The manual method can be used to program a remote if you know the make and model of your equipment.
- Turn on your device, e.g. TV.
- Press the TV button on your Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided keycode in your remote’s instruction manual.
- After that, point the remote control at your selected device and press and hold the power button.
- Release the power button as soon as the screen switches off.
How to Configure Dynex Universal Remote with Code Search
To program a universal remote, enter a 3-digit code into the remote. This will force it to search for the correct code for your device or remote.
- Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Hold on the power button on your remote and press the channel up button until the device or TV turns off.
You can get started with these codes. If you want to use the manual methods, you can also get started. I look forward to hearing your thoughts in the comment box.
