Element Universal Remote Codes & Program Instructions: There are 3 methods of programming your Element Universal remote. Did you recently purchase the Element Universal Remote Control? Are you interested in the methods that work so that you can operate multiple devices at home using a single remote? I am fully prepared for that as this article is armed with lots of codes and the best 3 famous methods you will appreciate in the end.
Table of Contents
The Code List for Element Universal Remote Control
These codes are working. All you need is to input them correctly in your remote. if you didn’t enter any one of them correctly, repeat the same step until you are finally correct. The methods can always serve as rescuers whenever the codes fail you.
Brand Name | Element Remote Codes |
GE | 1091, 1651, 5361, 2401, 1025, 5341, 5471, 6021, 4111, 5841, 5831, 5421, 5411, 1173, |
RCA | 13907, 3559, 1886, 12964, 2183, 14217, 1687, 13559, 12183, 11687, 12256, 2964, 11886, |
Magnavox | 0073, 0088, 0001 |
Philips | 14156, 1918, 5361, 5421, 5831, 3477, 11147, 14023, 1651, 1091, 5841, 5471, 13656, 14175, 6021, 10862, 4111, 2401, 5411, 5341, 11068, 11568, |
Westinghouse | 0143, 0114, 1146, 0002 |
Xfinity | 13559, 11687, 12183, 12964, 13907, 11886 |
Jumbo | 238, 247, 252, 168, 121, 127, 151, 153, 154, 231, 236, 004, 2183 |
Cox | 1687, 1886, 2183 |
Verizon | 3264 |
Comcast Xfinity | 13559, 11687, 11886, 11864, 12183,10178, 12964, 12260, 13907 |
RCA 3 in 1 | 11687, 12964, 13559, 11886, 12183 |
The mentioned brands in the list above means, Element Universal Remote Codes can work on them.
4 Digits Universal Remote Codes for Element Remote
- 2183
- 3264
- 1687
- 1886
5 Digits Universal Remote Codes for Element Remote
11687, 12183, 11886, 10178
3 Digits Universal Remote Codes for Element Remote
127, 151, 153, 154, 231, 236, 238, 247, 252, 168, 121, 046, 005, 028, 043, 048, 076, 096, 155, 004, 051
How to Program Element Universal Remote Control
I mentioned earlier that we have some methods of programming almost all universal remotes. The methods are 3, namely: manual, auto search, and code search. They are all considered manual methods since you will be operating the remote by yourself.
How to Program Element Universal Remote Control
In this method, the entire codes have to go through scanning in the remote. The remote scans the codes to detect the correct code for your remote.
- Switch on your Device e.g. TV so you can operate it.
- Turn on your remote control and tap on the device button on it e.g. TV, DVD, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
- Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
- Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
- Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Program your Apex DVD Universal Remote Control with Manual Method
In this method or process, the make and model of your equipment will be figured out using a keycode provided in the remote instruction booklet. The keycode will be entered in your remote to find the correct code for it. The instruction is explained below:
- Turn on your device, e.g. TV.
- Press the TV button on your Element Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided keycode in your remote’s instruction manual.
- After that, point the remote control at your selected device and press and hold the power button.
- Release the power button as soon as the screen switches off.
How to Program your Element Universal Remote Control with Code Search method
In the method, a unique 3 digit code is entered in the remote. the code will then force the remote into auto search mode which will eventually find the perfect code for the selected device.
- Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Hold on the power button on your remote and press the channel up button until the device or TV is turned off.
If you find any of the methods difficult to carry out, kindly indicate the part that is giving you the issue in the comment box and I will see what to do about it.