Emerson DVD Player Universal Remote Codes: If you are searching for the codes and the best methods you can use to program your Emerson DVD Player, being on this site marks your final bus stop. I have the best codes and methods that can work with your device. You will need to follow the steps judiciously so that you can correctly program your device. If there is any case you can’t program your device with the universal remote selected, it is possible that you haven’t selected the right code, otherwise, the auto search method will always do the magic.
Emerson DVD Universal Remote Codes List
This article is loaded with the Emerson DVD Universal Remote codes that you can use to program your Emerson DVD or other devices as well.
Table of Contents
The list of 5 Digit Universal Code for Emerson DVD Player
- 30591
- 30675
- 32213
List of 4 Digit Universal Code for Emerson DVD Player
3387, 3391, 3392, 3403, 3501, 3533, 3260, 3283, 3323, 3324, 3142, 3417, 3432, 3436, 0591, 0675, 0821, 1268, 2213, 0236, 0456, 0458, 0227, 3376, 3377, 3386.
List of 3 Digit Universal Code for Emerson DVD Player
377, 501, 060, 086, 121, 124, 241, 396, 405, 456, 458, 376.
The Process of Programming Emerson DVD Player
There are several methods that can be used to program your Emerson DVD universal Remote with the DVD Player or other devices and they are discussed below:
How to Program Emerson DVD Universal Remote Without Codes
This is the auto search method that allows your remote to auto scan the codes one after the other until you finally find the right code that works with your device. The steps are simple as illustrated below:
Switch on your Device e.g. TV so you can operate it.
Turn on your remote control and tap on the device button on it e.g. TV, DVD, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Program Emerson DVD Universal Remote—Manual Method
You can make use of keycode to search for the make and model of your equipment and then you will be able to program your Emerson Universal Remote Using the keycode provided in the Remote’s instruction manual.
Turn on your device, e.g. TV.
Press the TV button on your Emerson DVD Player Universal Remote Control.
Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
Enter the provided keycode in your remote’s instruction manual.
After that step above, point the remote to your TV and then press and hold the power button.
Once the TV switches off, release the power button.
How to Program Emerson DVD Universal Remote—Code Search Method
You can as well adopt the auto search method to program your Emerson DVD Player universal remote with your devices and this will add extra fun to your home entertainment. You can follow these steps to perform this method:
Turn on your device to get it ready for programming.
Turn on the remote control as well.
Press and hold the setup button on your remote control
Enter the unique 9 9 1 codes.
After that, you should hold down the power button on your remote and then press the channel up button until the TV turns off since we are working with TV in this article.
Conclusion
If there is any observation or additional information you may want us to know about, we will be glad to see them in the comment box. I am also urging you to carefully follow the steps given, in so doing will you be able to program your universal remote properly.
No Responses