Emerson Universal Remote Codes & Program Instructions: The Emerson Universal Remote codes you have been looking for are here now. This means these codes can work with your Emerson remote device. Therefore, you should not hesitate to use the codes that will be listed in this article later.
If you need the instruction methods instead, you can still get the instruction methods in the same article right here. There are 3 types of methods to configure your universal remote to your selected device and they are included in this article.
Table of Contents
List of Emerson Universal Remote Codes
Emerson TV Remote 4 Digit Universal Codes
0205, 3031, 3203, 3005, 3010, 3013, 3012, 0181, 0198, 0207, 0490, 3204, 3186, 3015, 3218, 3025, 0650, 0263, 3011, 3008
Emerson TV Remote 3 Digit Universal Codes
691, 533, 720, 654, 655, 535, 657, 536, 527, 528, 534, 544, 537, 846, 672, 777, 523, 632, 526
Emerson TV Remote 2 Digit Codes
01, 03, 04, 23, 32, 34, 35, 77, 83, 84
Emerson TV Remote 5 Digit Universal Codes
10180, 13559, 11661, 12183, 10451, 11963, 10171, 10463, 11886, 11909, 11864, 11394, 13623, 11665,
RCA Universal Remote Codes For Emerson TV
1023, 1024, 1025, 1026, 1027, 1028, 1004, 1006, 1012, 1029, 1030, 1031, 1039, 1041, 1042, 1043, 1032, 1033, 1034, 1038, 1044, 1046, 1047, 1048, 1049, 1073, 1123, 1124, 1162, 1171, 1177, 1179, 1191, 1196, 1208, 1035, 1036, 1037
Philips Universal Remote Codes For Emerson TV
0002, 0502, 0006, 0115, , 0906, 0316, 0505, 0614, 0324, 0924, 0626, 0826, 0027, 0327, 0128, 0805, 0703, 0903, 0004, 0519, 0106, 0104, 0304, 0604, 0804, 0005, 0105, 0228, 0632, 0134, 0247, 0605, 0705, 0506, 0706, 0520, 0305.
GE Universal Remote Codes For Emerson TV
0004, , 0049, 0051, 0189, 0053, 0147, 0039, 0130, 0227, 0233, 0250, , 0257, 0265, 0266, 0310, 0009, 0044, 0135, 0252, 0254, 0325, 0456, 0040, 0041, 0027, 0030, 0023, 0024, 0179 0032, 0034, 0035, 0037, 0042, 0021, 0045, 0025
One-For-All Universal Remote Codes For Emerson TV
0004, 0009, 0053, 0147, 0039, 0130, 0051, 0189, 0044, 0135, 0049, 0227, 0233
How to Connect Emerson Universal Remote with the auto Search
These are the steps involved in connecting your remote to the selected device using auto search method:
- Switch on your Device e.g. TV so you can operate it.
- Turn on your remote control and tap on the device button on it e.g. TV, DVD, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
- Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
- Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
- Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Connect Emerson Universal Remote with Manual Search
To do that, you should follow these steps outlined below:
- Turn on your device, e.g. TV.
- Press the TV button on your Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided keycode in your remote’s instruction manual.
- After that, point the remote control at your selected device and press and hold the power button.
- Release the power button as soon as the screen switches off.
- Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Hold on the power button on your remote and press the channel up button until the device or TV turns off.
The codes are to be used with your Emerson Universal Remote while the instruction methods are alternative means to configure your remote if the codes don’t work.
