JVC TV’s Universal Remote Codes & Program Instructions: If you want your JVC Smart TV universal remote to work with your devices at home, then you will need either 3, 4, or 5 digit codes intact to execute that task for you. In a situation whereby you don’t possess such codes, it will be a bit difficult to program your devices with JVC Universal remote; no wonder I have listed the entire working codes that you need in this article.
Keep reading, I also included the instructions that you can follow to configure your universal remote as explained in the article.
These codes are listed below. The codes are effective, they work with your JVC Smart TV universal remote. if you are using sky remote, dish, or even Philips remote, etc. the codes I mentioned below can work with them.
- 0065
- 0067
- 0141
- 0060
- 0026
- 0197
- 0069
- 0242
- 0923
- 0012
These codes are exemptional because they work with almost all JVC Universal Remote. If you eventually noticed that the codes didn’t work, then you can try these ones listed below:
Table of Contents
4 Digit Codes for JVC TV’s Universal Remote
1235, 1288, 1299, 1011, 1012, 1026, 1049, 1052, 1054, 10551227, 1130, 1131, 1080, 1092, 1117, 1131
3 Digit Codes for JVC TV’s Universal Remote
054, 055, 060, 065, 067, 089, 013
5 Digit Codes for JVC TV’s Universal Remote
14273, 18016, 12811, 13650, 10650, 10053, 10069, 10160, 1193, 11774, 10169, 17706, 11892, 12859, 13829, 10053, 12561, 10683, 14808, 12265, 10463, 19405, 12049, 11670, 11349, 12463, 11245, 107311.
GE Universal Remote Codes For JVC TV
0247, 0197, 0067, 0923, 0012, 0065, 0026, 0060, 0141, 0069
Magnavox Universal Remote Codes For JVC TV
- 0053
- 0038
One For All Remote Codes JVC TV
0247, 0197, 0067, 0923, 0012, 0065, 0026, 0060, 0141, 0069
Philips Universal Remote Codes For JVC TV
0715, 0108, 0802, 0204, 0508, 0607, 0308, 0993, 0326, 0321
RCA Universal Remote Codes For JVC TV
1159, 1063, 1054, 1285, 1269, 1157, , 1182, 1055, 1065, 1239, 1013, 1123, 1430, 1066,1067, 1393, 1158, 1060, 1012, 1396
How to Configure JVC TV Universal Remote without Code
You can do the configuration of your universal remote without code by scanning the entire code in the remote. The steps to follow are thus:
- Switch on your Device e.g. TV so you can operate it.
- Turn on your remote control and tap on the device button on it e.g. TV, DVD, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
- Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
- Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
- Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Configure JVC TV Universal Remote with Manual Method
In the manual method, you can detect your code by entering a keycode in the instruction booklet. The code will find the make and model of your equipment.
- Turn on your device, e.g. TV.
- Press the TV button on your Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided keycode in your remote’s instruction manual.
- After that, point the remote control at your selected device and press and hold the power button.
- Release the power button as soon as the screen switches off.
How to Configure JVC TV Universal remote with Code Search
The code search is done by forcing your remote into auto search mode with the use of a 3 digit code:
- Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Hold on the power button on your remote and press the channel up button until the device or TV turns off.