Konka TV Universal Remote Codes & Program Instructions: Now that you have your Konka TV, it is time to check the power of the universal remote codes we have for you. The codes are correct and work perfectly with all universal remotes featured in this article.
The joy of having only one remote operating all of your devices cannot be overemphasized. Now that you are on my website, you will find the solution you have been looking for. I will also discuss the 3 methods of configuring your remote control manually.
Why not keep reading while you get close to the code list and the methods that hardly fail you when it comes to programming your remote.
RCA Universal Remote Codes For Konka TV
- 3354
- 3353
GE & One-For-All Universal Remote Codes For Konka TV
0016, 0011, 0066, 0029, 0413, 0103, 0047, 0053, 0412,
Philips Universal Remote Codes For Konka TV
0208, 0306, 0702, 0906, 0842, 0942, 0911, 0203, 0504,
Table of Contents
VIZIO Universal Remote Codes for Konka TV
- 0047
- 0016
- 0053
- 0066
- 0412
- 0011
- 0103
- 0413
- 0029
How To Program A konka Tv Universal Remote?
Are you aspiring to program your universal with manual methods? This article has outlined them in a simple form you will quickly understand. The 3 methods are usually recommended when the codes didn’t work with your remote or device.
How to Configure Konka TV Universal Remote Without Codes
In the auto search method, you can configure your remote by scanning the entire code in the remote and the ideal code will be detected. The steps are below:
- Switch on your Device e.g. TV so you can operate it.
- Turn on your remote control and tap on the device button on it e.g. TV, DVD, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
- Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
- Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
- Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Configure Konka TV Universal Remote With Manual
In the manual search method, you need a keycode to detect the make and model of your equipment. the keycode can be found in the remote’s instruction booklet.
- Turn on your device, e.g. TV.
- Press the TV button on your Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided key code in your remote’s instruction manual.
- After that, point the remote control at your selected device and press and hold the power button.
- Release the power button as soon as the screen switches off.
How to Configure Konka TV Universal Remote With Codes Search
In the code search method, the ideal code is detected by entering a 3 digit code in your remote; the code will then force your remote into an auto search mode which will then detect the correct code in question.
- Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Hold on the power button on your remote and press the channel up button until the device or TV turns off.
The Konka TV Universal codes in this article are the working types. You can try them to see how effective they are. There are also 3 methods of configuring your remote control if you don’t want to use the codes. The methods are auto search, code search, and manual search.
