LG DVD Player Universal Remote Codes: I will provide the correct codes for the LG DVD Player Universal remote in this article and you will also find the various instruction methods for programming your remote. These codes can also work with RCA GE, ONN, Philips, and One for All.
Table of Contents
4 Digit Codes for LG DVD Player Universal Remote
- 2303
- 2339
- 2352
- 2363
- 2368
- 2371
- 2418
- 0571
- 0801
- 1906
- 0869
- 1983
- 2039
- 2270
- 2297
- 0591
- 0741
ONN Universal Remote Codes For your LG DVD Player
0205, 0635, 1565, 2925, 3785, 3885, 2635, 4285, 3915, 2335, 2555, 2565.
GE Universal Remote Codes For your LG DVD Player
0972, 0907, 0405.
Magnavox Universal Remote Codes For your LG DVD Player
0898, 0392, 0142.
How to Program your LG DVD Universal Remote With Auto Search
The codes are gone through scanning one after the other in the universal remote until the correct code is detected for your equipment.
- Switch on your Device e.g. TV so you can operate it
- Turn on your remote control and tap on the device button on it e.g. TV, DVD, CBL and OK/SEL and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
- Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
- Verify the code by clicking on the power button of your Universal Remote, if it starts up your device; try to change the channel to verify that the code is correctly programmed.
- Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Program your LG DVD Universal Remote With Manual Search
There is a keycode you will need to enter in order to detect the make and model of your equipment. The keycode is found in the instruction booklet of your remote:
- Turn on your device, e.g. TV.
- Press the TV button on your LG DVD Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided keycode in your remote’s instruction manual.
- After that step above, point the remote to your TV and then press and hold the power button.
- You can then release the power button as soon as the device screen switches off.
How to Program your LG DVD Universal Remote With Code Search
There is a unique 3 digit code that will be entered in your remote to force it into auto search mode and from there, you can get your Universal Code:
- Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Hold on the power button on your remote and press the channel up button until the device or TV turns off.
If there is anytime you tried a method and it failed, I advise that you should check the code you entered carefully and then repeat the method with another code until you get it right. This advice is for those using the code search and Manual method.
No Responses