Logik TV Universal remote control of course can be configured. If you are interested in synchronizing your remote with the best universal codes that work, I have them on my list today. There are 4, 3, and other codes that you can use to configure your remote to operate multiple devices in your home.
Table of Contents
List of Logik TV Universal Remote 4 Digit Codes
- 1245
- 0726
- 1065
- 2135
- 0016
- 1107
- 0399
- 0039
- 0011
- 0908
- 2107
- 0060
List of Logik TV Universal Remote 3 Digit Codes
- 016
- 072
List of Logik TV Universal Remote 5 Digit Codes
10016, 14235, 16915, 14216, 16611, 12246, 12293
RCA Universal Remote Codes For Logik TV
1001 , 1083
GE & One-For-All Universal Remote Codes For Logik TV
0000, 0031, 0001
Philips Universal Remote Codes For Logik TV
0704, 0701, 0601
The remote codes will work on Logik TV model numbers:
L19LDIB10 / L22LDIB10, L22LDVB19, L22DVDB10, L24DIGB1, L24DVDB19, L26DIGB21, L26DVDB21, L32DLCD11, L22DIGB10, L22DIGB11, L22DVDB11, L22DVDB20 / L22DVDW10, L22LDVB21, L24DIGB11, L23IP11
L22FE12 / L24FE12, L19HE12, L22FEDN12 / L22FEDP12 / L22FEDR12 / L22FEDW12, L22FEDV12 /, L22FEDY12 / L22FEDO12, L26HED12, L26FE12, L26FE12l, L32HE12, L32HED12, L39FE12, L46FE12, LCXW19LN2D, L24FEDN13/P13/R13/W13, L32HE13,
L22FED13/LL24FED13, L25MDM13, L32HED13,, L17LID648, L19DIGB11, L19DVDB11, L19DVDP10 / L19DVDB20, L19DVDB10, LCXW19LN1, L19LDVB11 /, L19LDVP11 / L19LDVN11, L15LID628E / L19LI628E / L19LID628E / L19LID628WE / L22LI628E / L22LID628E / L22LID628WE, L19LIDI8 / L19LIDI8W / L22LIDI8 / L22LIDI8W, L19DVDP19 / L19DVDW19 / L22DVDB19 / L22DVDP19 / L22DVDW19, L19LDIB11, L19DIGB10, L19LDVB19, L17LIDI9E / L17LIDI9WE / L19LIDI9E / L19LIDI9WE / L22LIDI9E / L22LIDI9W, L22LDVB11 / L22LDVW11 / L22LDVR11 / L22LDVS11 / L22LDVN11
L24DVDB11, L24DVDB21, L26DIGB10, L26DIGB11, L26DVDB10, L26DVDB11, L26DVDB20, LCX27WN2, L32LW783, L32DIGB20
How to Program Logik TV Universal Remote Without Codes
The codes are scanned in the remote one after the other until the correct one is found. Your remote codes is usually on the auto search mode.
• Switch on your Device e.g. TV so you can operate it.
• Turn on your remote control and tap on the device button on it e.g. TV, DVD, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
• Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
• Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
• Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Program Logik TV Universal Remote With Manual Search
Through the manual code, you can configure your remote. The keycode is usually found in the universal remote’s booklet. It can help to detect the make and model of your device.
• Turn on your device, e.g. TV.
• Press the TV button on your Universal Remote Control.
• Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
• Enter the provided keycode in your remote’s instruction manual.
• After that, point the remote control at your selected device and press and hold the power button.
• Release the power button as soon as the screen switches off.
How to Program Logik TV Universal Remote with Codes Search
You can detect the code that works with your devices through code search method. All you need to do is enter 3 digit code in your remote control to convert it into auto search mode. The remote will search the codes one after the other until the correct one is found.
- Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Hold on the power button on your remote and press the channel up button until the device or TV turns off.
These are codes that work perfectly. However, if you noticed that they don’t work with your remote, then try the methods explained.
