Ocosmo Universal Remote Codes & Program Instructions: Do you want to program your ocosmo tv with your favorite universal remote control? Then enter the below-mentioned codes, either three- or four-, or five-digit codes and your tv will be paired with the universal remote.
If you could not connect your TV to your universal remote by entering any of the codes from the first list, then try entering the codes from the second list, and you will surely be able to program your remote.
Table of Contents
List of Ocosmo Universal Remote 5 Digit Codes
- 13899
- 10810
- 10878
- 11599
- 10000
- 11360
- 10889
How To Program Ocosmo TV Universal Remote?
Familiarize yourself with these methods to program a universal remote control with your ocosmo tv remote and experiment until you find the right code.
How to Program Ocosmo Universal Remote Without Codes
You can program your remote control without finding its code number by following a few steps of the programming procedure. The procedure is easy, efficient, and direct. In this method, your remote control will scan the codes one after another until it finds the code that works.
- Switch on your Device e.g. TV so you can operate it.
- Turn on your remote control and tap on the device button on it e.g. TV, DVD, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
- Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
- Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
- Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Program Ocosmo Universal Remote With Manual Method
The keycode can be used to program a universal remote control, and the keycode identifies the make and model of your equipment.
- Turn on your device, e.g. TV.
- Press the TV button on your Oscomo Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided keycode in your remote’s instruction manual.
- After that, point the remote control at your selected device and press and hold the power button.
- Release the power button as soon as the screen switches off.
Your TV will work perfectly now with the remote if it previously did not. If your device is still not working, try repeating the same procedure with a different code from the same column
How to Program Ocosmo Universal Remote With Code Search
If the code in the manual doesn’t work, you may be able to set your universal remote to search mode to find the correct one. It’s a code in the manual that will put the remote control into search mode.
- Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Press the power button on your remote, and then, while still pressing down on that button, repeatedly press the channel-up button until the device or TV turns off.
Three programming methods are available. I can assure you they will work with your remote if done correctly. In the event that a method fails to program the remote, check to see if the code is correct. If it is not, try another code.