Sanyo DVD Player Universal Remote Codes: Now that you have your Sanyo DVD Player, it is clear that the reason why you are on this website is to search for the best codes needed to program the Universal remote control that comes with it. For this reason, I have made some research about the correct codes that can work with your remote control. I didn’t stop there but was able to gather some of the best programming instructions that will help you program your remote properly.
Table of Contents
Sanyo DVD Player Universal Remote Code List
With this code list, you can easily synchronize your Sanyo DVD Player Universal Remote to operate your devices. I want you to take note of one thing, your universal remote can work with different devices such as DVD, VCD, TV, and others not mentioned.
4 Digit Codes for Sanyo DVD Player Universal Remote
- 0873
- 0896
- 2050
- 2393
- 0670
- 0695
- 0790
- 1919
One for All Codes for Sanyo DVD Player Universal Remote Control
- 0896
- 0670
Sanyo DVD Player Universal Remote Codes for RCA (Brand)
- 3359
- 3518
- 3508
How to Program your Sanyo DVD Player Universal Remote Control without Code
The simple method involves the use of your universal remote to scan codes one after the other until the right code is detected. This method does not feature entering of codes in your remote unlike the other two methods that will be discussed shortly.
- Switch on your Device e.g. TV so you can operate it.
- Turn on your remote control and tap on the device button on it e.g. TV, DVD, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
- Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
- Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
- Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Program your Sanyo DVD Player Universal Remote Control with Manual Method
If you can enter a keycode in your remote control’s instruction manual using this method, you will successfully program your universal remote to operate other devices selected. The keycode will aid in searching and detecting the model and make of your device or equipment. Here are the steps:
- Turn on your device, e.g. TV.
- Press the TV button on your Sanyo DVD Player Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided keycode in your remote’s instruction manual.
How to Program your Sanyo DVD Player Universal Remote Control with Code Search Method
If you are interested in searching for your remote codes using the code search method, all you need to do is enter a unique 3 digit code that forces your remote into auto search mode and then, you can get the ideal code for your remote control. The steps are listed below:
- Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Hold on the power button on your remote and press the channel up button until the device or TV is turns off.
What is your take on this article? Do you have any suggestions for us to learn from? If there is any opinion you have for this article, kindly drop it in the comment box for review. Thank you.
No Responses