Sharp DVD Universal Remote Codes: Have you just bought your Sharp DVD Player and you want to operate it with more convenience using its Universal Remote? I have everything you need beginning from codes to the best of instructions and methods that will get things done properly for you. I have prepared 5, 4 digits, and One for All codes that will work with your Sharp DVD Universal Remote codes. You will find them shortly below:
Table of Contents
Universal Remote Code list for Sharp DVD Player One for All
- 2227
- 2082
- 2170
4 Digit Codes For Sharp DVD Universal Remote
- 2174
- 2227
- 2044
- 2082
- 2086
- 0695
- 0630
- 0752
- 2170
5 Digit Codes For Sharp DVD Universal Remote
- 22561
- 20675
- 20752
- 21256
- 20630
- 21419
- 22250
How to Program your Sharp DVD Universal Remote with Auto-Search Method
The auto search method involves the scanning of the codes in the remote automatically one after the other until you find the correct code that works ideally with it.
- Switch on your Device e.g. TV so you can operate it
- Turn on your remote control and tap on the device button on it e.g. TV, DVD, CBL and OK/SEL and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
- Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
- Verify the code by clicking on the power button of your Universal Remote, if it starts up your device; try to change the channel to verify that the code is correctly programmed.
- Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Program your Chunghop DVD Universal Remote with Manual Method
If you decided to use the Manual method, it is also effective. All you need to do is enter the keycode that is usually found in the instruction booklet of your remote. This keycode will detect the make and model of your equipment.
- Turn on your device, e.g. TV.
- Press the TV button on your Chunghop DVD Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided keycode in your remote’s instruction manual.
- After that step above, point the remote to your TV and then press and hold the power button.
- You can then release the power button as soon as the device screen switches off.
How to Program your Sharp DVD Universal Remote with Manual Method
For this method, you will need to enter a keycode from the Instruction manual on your remote booklet and then it will detect the make and model of your equipment or device.
- Turn on your device, e.g. TV.
- Press the TV button on your Sharp DVD Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided keycode in your remote’s instruction manual.
- After that step above, point the remote to your TV and then press and hold the power button.
- You can then release the power button as soon as the device screen switches off.
How to Program your Sharp DVD Universal Remote with Code Search Method
If you are using this method, you will need to enter a 3 digit Unique code for your device and remote to be able to work together. The code will force your remote into auto search mode:
- Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Hold on the power button on your remote and press the channel up button until the device or TV turns off.
If you want to enjoy your home entertainment the most, kindly follow these instructions carefully and use the suggested codes that are featured in this article.
No Responses