Sharp TV Universal Remote Codes & Program Instructions: The Sharp Universal remote codes support multiple codes just like every other universal remote control. It is not however necessary to program the Sharp TV universal remote control to connect to Sharp Aquos TV or other sharp TV. That stress has been removed.
If your aim is to get rid of other devices so that they can be operated with a single Sharp TV Universal remote, then you are right. The remote supports multiple universal codes that can make your dream a reality. In order to be able to properly use Sharp TV Universal remote codes, there is a need for you to know the programming methods that will be explained below.
Table of Contents
List of Universal Codes for Sharp TV Universal Remote
3 Digit Codes List for Sharp TV Universal Remote
- 712
- 812
- 813
- 913
- 918
- 013
- 014
- 111
- 502
- 509
- 002
4 Digit Codes List for Sharp TV Universal Remote
1025, 1064, 1077,, 1078, 1081, 1097, 1099, 1153, 1157, 1274, 1298, 1311, 1312, 1362, 1375, 1378, 0039, 0093, 0165, 0386, 1004, 1009, 1011
5 Digit Codes List for Sharp TV Universal Remote
2183, 10463, 11463, 10748, 11314, 11660, 10171, 11204, 11326, 11517, 11641, 1178011785, 11892, 11963, 12002, 10178, 10019, 10748, 11314, 11660, 11710, 11780, 12049, 10171, 11204, 11326
| Brand | Sharp TV Remote Codes |
| RCA | 1004 , 1006 , 1012 , 1026 , 1029 , 1095 , 1111 , 1112 , 1113 , 1122 , 1171 , 1173 , 1196 , 1261 , 1265 , 1357 , 1372 , 1423 , 1437 ,1443 , 1447 |
| GE | 0079, 0123, 0063, 0020, 0004, 0009, 0226, 0266, 0006, 0095, 0122 |
| One-For-All | 0020, 0123, 0004, 0079, 0009, 0226, 0266, 0063, 0006, 0095, 0122 |
| Philips | 0509, 0913, 0907, 0603, 0002, 0502, 0224, 0228, 0202, 0111, 0813 |
| Magnavox | 0028, 0034, 0040, 0058 |
List of RCA Universal Remote Codes for Sharp TV
1113 , 1122 , 1171 , 1173 , 1196 , 1261 , 1265 , 1357 , 1372 , 1423 , 1437 ,1443 , 1447, 1004 , 1006 , 1012 , 1026 , 1029 , 1095 , 1111 , 1112.
GE And One-For-All Universal Remote Codes List for Sharp TV
0226, 0266, 0006, 0095, 0122, 0079, 0123, 0063, 0020, 0004, 0009
Philips Universal Remote Codes List for Sharp TV
0502, 0224, 0228, 0202, 0111, 0813, 0509, 0913, 0907, 0603, 0002
Magnavox Universal Remote Codes List for Sharp TV
0040, 0058, 0028, 0034
How to Program your Sharp TV Universal Remote Control without Code
The codes are subjected to auto-scanning in the universal remote until the correct code is found and used for your remote or device. The steps are simple to follow:
- Switch on your Device e.g. TV so you can operate it.
- Turn on your remote control and tap on the device button on it e.g. TV, DVD, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
- Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
- Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
- Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Program your Sharp TV Universal Remote Control with Manual Method
A keycode input is done in the method. The keycode is usually found in the remote instruction booklet. Its function is to detect the make and model of your equipment. The steps are explained below:
- Turn on your device, e.g. TV.
- Press the TV button on your Apex DVD Player Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided key code in your remote’s instruction manual.
- After that, point the remote control at your selected device and press and hold the power button.
- Release the power button as soon as the screen switches off.
How to Program your Apex DVD Universal Remote Control with Code Search method
You should enter 3 digit code in your remote to force it into auto search mode. The correct code will be automatically detected during the process.
- Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Hold on the power button on your remote and press the channel up button until the device or TV is turns off.
The codes are effective to use but in any case you realize the codes didn’t work with your remote control, kindly use the methods explained.
