Summit TVs – RV Universal Remote Codes & Program Instructions: Here is a list of universal remote control codes for Summit televisions and you can check the codes below, if you are unable to program your universal remote with your television then you can use these codes in your remote to program it with your television.
I have provided the following instructions to program your TV using your remote control. The codes I provide work for most Sony and Samsung televisions. However, if you are unable to program your TV, try re-programming with different codes until you find the correct code.
Table of Contents
Your Summit TV Universal Remote Codes
- 508
- 506
Summit TVs – RV Televison Universal Remote 4 Digit Codes
- 1043
- 0030
- 1758
Summit TVs – RV Televison Universal Remote 5 Digit Codes
- 10030
Summit TVs – RV Televison Universal Remote 3 Digit Codes
- 506
- 508
Your Summit TVs – RV Universal Remote Codes List
After inputting the following codes as per the instructions given in the booklet, you can use the summit tv with your CAB or SAT remote. The codes are quoted below:
| Brand Name | Codes |
| AT&T | 1043 |
| Comcast | 10030 |
| DISH | 506 |
| DirecTV | 10030 |
| RCA | 0030 |
Herewith I am providing you with the best methods to program your TV with your universal remote control. So check them now:
How do you Program Summit TVs – RV Televison Universal Remote?
There are three different methods to operate any universal remote control by programming with your television, if you program with working codes by using the below methods then your television will be working fine! So let us have a look at the methods if you have the codes (above).
How to Program your Summit TVs Universal Remote without Codes
- Switch on your Device e.g. TV so you can operate it.
- Turn on your remote control and tap on the device button on it e.g. TV, DVC, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
- Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
- Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
- Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Program your Summit TVs Universal Remote with Manual Method
There is a keycode in the instruction booklet provided with the remote. The keycode is entered on the remote to be able to demonstrate the following operations:
- Turn on your device, e.g. TV.
- Press the TV button on your Summit TVs Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided keycode in your remote’s instruction manual.
- After that, point the remote control at your selected device and press and hold the power button.
- Release the power button as soon as the screen switches off.
How to Program your Summit TVs Universal Remote with Code Search method
In this process, if you typed in a unique 3 digit code in your remote, it will be forced into a search mode until the correct code is found.• Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Hold on the power button on your remote and press the channel up button until the device or TV is turns off.
The codes can be numerous, so you may choose any that bests suits your needs. You can also use the methods above. The three methods are commonly used in programming universal remotes.
