Sylvania Soundbar Universal Remote Codes: You have purchased your Sylvania Soundbar but you need a code that can work with it so that you can connect your universal remote to your device. You can check the various types of methods below and also working codes. So just try each code until your soundbar is programmed with your favorite universal remote control.
Important Link:
1. Pyle Soundbar Universal Remote Codes and the Program Guide.
2. What Are the Universal Remote Codes for LG TV and the Setup.
Table of Contents
5 Digit Code for Sylvania Soundbar Universal Remote
-
30797
4 Digit Codes for Sylvania Soundbar Universal Remote
-
4068
If these codes above did not work, you can as well adopt the code search method which normally has more chances of working compared to the method mentioned already.
How To Program Sylvania Soundbar Universal Remote
This involves using Comcast Remote Control:
1. Turn on your soundbar first before any step at all.
2. Tap on Aux
3. Hold on the Setup button and press it down until the key blinks twice.
4. Release the setup this time.
5. Enter the 3 digit or fo4 digit code thus: 9 9 3 or 9 9 1 3.
6. The Aux key should blink twice if you entered the correct code shared above.
7. You should now tap on the power button and then point the remote control to your soundbar.
8. Press the CH+ until the soundbar turns off.
9. At this stage, your remote will send IR Codes to your chosen device from the library.
10. Press Lock in the code.
11. The Aux will blink if you follow the steps correctly.
Code Search using DIRECTV Remote Control:
This is another method you can use to get your code to program your soundbar. The steps are easy too. If you can follow the steps correctly, they are expected to work perfectly.
1. Switch on your soundbar.
2. Press the vol+ but set it to Mute.
3. Tap the AV1 or AV2
4. Hold and press Mute and Select buttons so that you will receive 2 blinks.
5. Enter the code 9 9 1 and then allow two blinks responses.
6. Enter the number 3
7. Press VOL+ again and then release the button.
8. Point your universal remote to the Soundbar and continue to press and release the CH UP key.
9. If you notice that the volume of your soundbar changes, press the Select button to lock the code.
This method explained above can be used to find the codes for your Comcast and Directv. It can also be used to program all types of universal remote controls.
I have prepared more methods to share with you in a short time and this methods can be used with the sylvania soundbar.
How do you Program Sylvania Soundbar Universal Remote Without Codes
The auto search method as usual is the one that involves the scanning of the codes in the universal remote. The codes are usually scanned at time in order to detect the functional one with your universal remote control. The instructions for programming the devices are listed below:
1. Switch on your tv first before any other step.
2. Turn on your universal remote and tap the TV button in this case for 3 seconds to observe the LED light to indicate the TV is operative.
3. Point your remote control at the TV and then click on CH+ and CH- keys on your remote. Your remote should display on and off signals. As soon as you observe the signals, press the up or down button key continuously until your tv is turned off in this our case.
4. You can now verify the code input by clicking on the power button. The tv should turn on. Once you notice that the tv starts, change the channel to confirm that your universal remote is well programmed.
5. Click on the tv button to save the searched code. The LED of your tv will blink two times indicating that the code is stored.
How do you Program Sylvania Soundbar Universal Remote With Manual Method
Keycode method is another way you can program your soundbar universal remote. The keycode will help in identifying the make and model of your equipment. These are the steps to program your universal remote using the keycode method:
1. Turn on your device first.
2. If you are programming your remote to a tv, press the corresponding button on your universal remote.
3. Press and hold the setup button on your universal remote until it displays its flash light to indicate that it is now in the learning mode.
4. Enter the keycode provided on the instruction booklet on the programming guide. It is the final stage.
5. Once you are done with this last stage above, you should then point your remote to the device you are working on. In this our own case, the tv and press and hold the power button on your remote.
6. At this point, you can release the power button to see if the tv screen will go off. If it does go off, it means, the programming is functional. If you noticed that the programming is not functioning, then repeat the same steps with another code provided on the instruction manual.
How do you Program Sylvania Soundbar Universal Remote With Code Search
We are done with the code method without code, now, let us look at how we can do it by setting up our universal remote to the search mode to get a workable code. We normally apply this method, if every other method didn’t work. This method is a code in manual that forces your remote to search mode. The steps you can follow to program it are listed below:
1. Turn on your Device before any other procedure.
2. Press and hold the setup button
3. Enter the 3 digit code thus: 9-9-1
4. Hold down your remote’s power button and then press the channel up until the device you are working on in this our example, tv, turns off.
This method I just explained is very effective, despite it takes extra time compared to the previous. If you can follow the instructions given correctly, definitely, the code will function with your device.
Conclusion
These methods are effective. If you are stranded and don’t know what to do, all you need is follow my instructions judiciously and you will be able to program your TV and other devices to be funcytional with Sylvania Soundbar Universal Remote.
No Responses