Taotronics Sound Bar Instructions Codes  & Guides

Your being on this page of my website indicates that you or a friend or a family member is using Taotronics Sound Bar Instructions Codes  & Guides and you wish to program the remote so that you can use it with other devices. If I am right, then you are right also for visiting this website. I am going to make your journey to programming your own universal remote very easy. I will provide the important codes needed to synchronize your device with this universal remote mentioned above and at the same time give you the various methods you can use to program them together. Are you ready? Let the game begin then:

Note: I will be working on the Tao Tronics Soundbar Universal Remote models such as tt-sk023, tt-sk017, and tt-sk15. Another thing you should know is that the codes that will be given shortly are not conventional remote codes but if you can follow the steps to be given properly, they will work with your remote correctly.

In case your remote does not work with any of the codes, don’t worry, as you can operate it in the form of a Bluetooth device connected to your phone or tablet.

Originally, Tao Tronics Soundbar Universal Remotes use wired connections that include Optical, RCA IN, and Coaxial. You can connect any of these devices by using your smartphone, Bluetooth devices, and tablet depending on your choice. Additionally, you can use the tao Tronic soundbar remote wirelessly too.

List of Tao Tronics Soundbar Universal Remote Codes

• 1999
• 0XD9
• 0X14

These are the sets of Tao Tronics Soundbars the listed codes work with perfectly:

• 21-inch soundbar TT-SK017.
• 34-inch soundbar TT-SK15.
• 36-inch soundbar TT-SK016.

Connecting Tao Tronics Soundbar Universal Remote Using the Bluetooth Method

This method is otherwise called the wireless Bluetooth method. The steps are simple and straightforward.

• Switch on the soundbar and then switch it to Bluetooth mode.
• Ensure that the Bluetooth of your device is switched on and then search for a nearby Bluetooth connection.
• Select the tao Tronics soundbar if found after the Bluetooth connection search.
• Tap on the connect to connect your device with the soundbar.
• If you successfully connected the two devices, the Bluetooth signal with turn into solid blue color and will make a beep sound to tell that your devices are now connected.

There are other methods you can use as mentioned below but they are restricted to some remotes:

Programming Tao Tronics Soundbar Universal Remotes without Code

This method enables you to program your universal remote by auto search in which the codes are scanned in the remote one after the other until you are finally able to find the one that works with your remote. The steps are mentioned below:

• Switch on your device such as your TV in this case.
• Turn on your remote and click on the corresponding device button. In our case TV.
• Point out your remote to your device or TV and then press the buttons CH+ and CH- and your remote will show the signals on and off respectively. Then, press the Up or Down button continuously until the TV turns off.
• Verify if the code is programmed correctly by clicking on the power button. If your device turns on, then the code is configured correctly.
• Click on the device button on your remote to store the code. The LED light will blink twice to show that your code has been stored.

As you can see, this method is simple and straightforward. You can always apply this method if you find out that your remote doesn’t work using the first method.

The Manual Method of Programming Tao Tronics Soundbar Universal Remote

This method is also simple and it is done with the use of a keycode that aids in providing the make and model of your device.

• Turn on your TV device first.
• You can now press the TV button on your Tao Tronics Universal Remote
• After that, you can press and hold the Setup Button of your Universal Remote until it displays a flashlight as a signal of learning mode activated.
• Type the keycode provided in your remote’s instruction booklet.
• As soon as you are done with this last step above, you can now point your remote to your device.
• Press and hold your remote’s power button.
• Release the remote’s power button when the TV screen switches off.

This method is also effective if you follow the given steps correctly.

Code Search Method for Programming Tao Tronics Soundbar Universal Remote

You are going to be using this method to force your remote into search mode by entering a 3 digit code. This code will ensure that your remote searches for the appropriate code to be used on your device. Here we go:

• Turn on your TV device or any device you are working on.
• You can press and hold the setup button on your universal remote after that.
• Enter the code 9 9 1 to force your remote into auto search mode.
• After that, you should press down the power button on your Universal remote and then press the channel up button until your TV or any selected device turns off.

The method is not hard as well as the rest. The only difference between this method and the rest in terms of a period is that this takes additional time compared to the first 3 methods but for sure, you will get the codes you desire.

Conclusion

Try the entire method if the need arises and you will find out that one or two or even all can work with your remote. The Tao Tronic Remote can work with other devices such as DVD, CD, and others. Thus, it is not restricted to TV only.