TCL TV’s Universal Remote Codes & Program Instructions: Did you just buy your TCL TV and you want to program it with the working codes? It is normal that sometimes, a person can find it a bit difficult to get the working codes; in this article, I have all the codes that work for you.
Sometimes, the codes may fail you, the next thing you will like to do is find an alternative way to configure your remote; in that case, I have 3 methods of doing it for you. The methods are the manual, auto search and code search.
Table of Contents
The List of Universal Codes for TCL TV Universal Remote
These codes are listed for the brands that are mentioned along. You can always lay your hands on them anytime you wish.
Brand Name | Remote Codes for TCL Roku TVs |
GE | 2891, 2851, 0091, 1421, 1691, 5961, 6031, 5771, 6171, 6201, 1851, 2011, 2061, 2111, 2301, 3421, 3431, 3571, 4921 |
RCA | 4398, 3426, 2414, 4178, 2434, 2429, 14398, 12434, 0898, 13183, 3847, 3183 |
Philips | 16475, 2301, 3431, 2856, 16573, 0091, 15260, 18516, 15738, 6031, 14333, 1851, 12770, 15466, 13020, 17750, 2851, 1421, 11125, 1691, 5771, 1564, 16665, 16276, 10900, 6201, 2011, 10125, 15064, 3421, 19247, 16374, 18522, 3571, 0733, 14235, 5961, 2061, 15564, 14216, 12270, 4921, 13773, 13871, 16915, 10625, 6171, 2111, 17956, 14874 |
Spectrum | 387, 1566, 268, 11756 |
Altice USA (Optimum/ Suddenlink/Cablevision) |
1111, 0821, 0001, 3411, 3311, 2801, 4141, 1931, 1661, 1561 |
AT&T DirecTV | 11756, 10706 |
ATT U-verse | 1346, 12434 |
Bright House Cable | 1756 |
Buckeye Broadband | 12434, 2434 |
Cable One (branded as Sparklight) | 2434 |
CenturyLink | 2414, 2434, 3183 |
Charter (Spectrum) | 11756 |
Comcast Cable (Xfinity) | 11756, 12434, 12290, 12292 |
Cox Communications | 1756, 11756, 12434 |
DISH Satellite TV | 1756, 535, 645 |
Frontier Communications | 688 |
Google Fiber | 2856 |
Hawaiian Telcom | 2434 |
ONN | 3851 |
RCA/Voxx | 11756, 12434,387, 12049 |
Time Warner (Spectrum) | 387, 1566, 268 |
TiVo | 0091, 0366 |
Verizon FIOS | 180 |
Windstream | 2414, 2434, 3183 |
XFINITY | 11756 |
GE Universal Remote Model 24922 |
2891 |
Logitech Harmony | Check Here |
Inteset INT-422 | 10885 |
Microsoft Xbox One | T1756 |
GE Universal Remote Codes List For TCL TV
1851, 2011, , 3431, 3571, 4921, 2891, 2851, 0091, 1421, 1691, 5961, 6031, 5771, 6171, 6201, 2061, 2111, 2301, 3421
RCA Universal Remote Codes List for TCL TV
0898, 13183, 3847, 3183, 14398, 12434, 4398, 3426, 2414, 4178, 2434, 2429
Philips Universal Remote Codes List for TCL TV
961, 2061, 15564, 14216, 12270, 4921, 13773, 13871, 16915, 10625, 6171, 2111, 17956, 14874, 16276, 10900, 6201, 2011, 10125, 15064, 3421, 19247, 16374, 18522, 3571, 0733, 14235, 16475, 2301, 3431, 2856, 16573, 0091, 15260, 18516, 15738, 6031
Spectrum Remote Codes List For TCL TV
268, 11756, 387, 1566
Comcast TCL Universal Remote Codes
12292, 12293, 12290, 12291
Xfinity Universal Remote Codes List For TCL TV
12290, 12292, 11756, 12434
Vivitar Universal Remote Codes List For TCL TV
- 3031
- 0053
- 5199
One For All Remote Codes List For TCL TV
0412, 0698, 0706, 1916, 0625
These codes are created for the brands I mentioned above. If one does not work, it is possible that you entered it correctly. If any brand has more than one code and you are sure that you entered the first code correctly and it didn’t work, try the next code repeating the same step until one of them works.
How to Program your TCL TV’S Universal Remote Control without Code
In this process, the codes are gone through auto scanning in the remote. The remote scans the entire codes until the ideal one is found for it.
- Switch on your Device e.g. TV so you can operate it.
- Turn on your remote control and tap on the device button on it e.g. TV, DVD, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
- Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
- Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
- Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Program your TCL TV’S Universal Remote Control with Manual Method
In this method, a keycode is typed in your remote to detect the make and model of your equipment. The keycode can be found in the instruction booklet of your remote.
- Turn on your device, e.g. TV.
- Press the TV button on your TCL TV’S Player Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided keycode in your remote’s instruction manual.
- After that, point the remote control at your selected device and press and hold the power button.
- Release the power button as soon as the screen switches off.
How to Program your Apex DVD Universal Remote Control with Code Search method
In this process, you can find the perfect code by entering a 3 digit code. The code will then force the remote into auto search mode until the correct code is found for it.
- Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Hold on the power button on your remote and press the channel up button until the device or TV is turns off.
Have you tried the codes provided and they didn’t work? For sure, the 3 methods will aid in finding the ideal code for your remote. The code search method usually takes more time to process compared to the other two methods.