Table of Contents
Terk Universal Remote Codes & Program Instructions
The codes for Terk Universal remote are already available on my website and they are tested and used many times without disappointment. If you have been thinking of how to program your Terk Universal remote, I have the codes for you in different brands. You will from now on be able to configure your universal remote using these codes.
I have provided you with some methods of configuration. The methods are needed for the process of programming your remote to your devices. Operating multiple devices with one remote is fun that cannot be compromised.
Check the List of Terk Universal Remote:
Your Terk Universal Remote Codes List
Brand Name | Remote Codes |
AOC | 1004, 1005, 1006, 1007, 1175, 1082, 1176, 1195, 1196, 1237 |
Admiral | 1001, 1173, 1083, 1211 |
Aventura | 1174 |
Aiko | 1016 |
Akai | 1002 |
Apex | 1236, 1240, 1241 |
Audiovox | 1038 |
Broksonic | 1250, 1280 |
Citizen | 1004, 1006, 1008, 1171, 1038, 1016, 1105, 1196, 1132 |
Craig | 1038 |
Curtis Mathes | 1000, 1004, 1006, 1015, 1049, 1105, 1073, 1171, 1196, 1212 |
Daewoo | 1004, 1005, 1006, 1018, 1017, 1082, 1171, 1202, 1196 |
Daytron | 1004, 1006, 1171, 1196 |
Emerson | 1004, 1006, 1012, 1025, 1023, 1029, 1030, 1035, 1033, 1037, 1036, |
Envision | 1004, 1006, 1196 |
Fujitsu | 1046, 1047 |
Funai | 1038, 1046, 1047 |
GE | 1000, 1003, 1004, 1006, 1022, 1052, 1054, 1087, 1100, 1165, 1166 |
GoldStar | 1004, 1005, 1006, 1012, 1056, 1019, 1082, 1155, 1156, 1172, 1196 |
Hisense | 1237 |
Hitachi | 1004, 1006, 1012, 1013, 1135, 1136, 1145, 1063, 1179, 1185 |
Infinity | 1062, 1130 |
JVC | 1012, 1013, 1014, 1054, 1060, 1063, 1066, 1123, 1157, 1159 |
Jensen | 1004, 1006, 1196 |
LG | 1005, 1082 |
Magnavox | 1004, 1006, 1008, 1019, 1062, 1069, 1075, 1077, 1088, 1130 |
Mitsubishi | 1004, 1005, 1006, 1022, 1051, 1079, 1080, 1082, 1064 |
Motorola | 1003, 1173 |
Onwa | 1038 |
Panasonic | 1003, 1054, 1130, 1062, 1160, 1350, 1351, 1214 |
Philco | 1003, 1004, 1005, 1006, 1008, 1062, 1069, 1019, 1075, 1077, 1082, 1088 |
Philips | 1003, 1004, 1008, 1019, 1012, 1062, 1068, 1069, 1075, 1088, 1087 |
Pioneer | 1004, 1006, 1136, 1185, 1179, 1196 |
Proscan | 1000, 1100, 1181, 1212, 1233 |
Proton | 1004, 1006, 1012, 1196 |
RCA | 1000, 1003, 1004, 1005, 1006, 1007, 1019, 1082, 1096, 1099, 1098 |
Samsung | 1004, 1005, 1012, 1015, 1019, 1082, 1105, 1106, 1171, 1172, 1196 |
Sansui | 1191, 1208, 1282 |
Sanyo | 1004, 1048, 1073, 1080, 1108, 1169, 1180, 1196 |
Scott | 1004, 1006, 1012, 1035, 1038, 1047, 1046, 1196 |
Sharp | 1004, 1006, 1012, 1026, 1029, 1095, 1111, 1112, 1171, 1173, 1196 |
Signature | 1001 |
Sony | 1002, 1205, 1216, 1218 |
Sylvania | 1004, 1006, 1008, 1019, 1062, 1068, 1075, 1076, 1077, 1088, 1130 |
Symphonic | 1033, 1038, 1189 |
Teknika | 1001, 1004, 1005, 1006, 1008, 1013, 1014, 1016, 1038, 1046, 1047, 1063 |
Toshiba | 1049, 1071, 1072, 1073, 1105, 1109, 1117, 1118, 1160, 1283 |
Yahama | 1004, 1005, 1006, 1019, 1082, 1196 |
Zenith | 1004, 1083, 1151, 1152, 1154, 1196, 1210, 1217 |
How to Program Terk Universal Remote With Auto Search
To search for your device code without codes, you have to scan the entire codes in the universal remote one after the other until the correct code is found.
• Switch on your Device e.g. TV so you can operate it.
• Turn on your remote control and tap on the device button on it e.g. TV, DVD, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
• Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
• Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
• Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.
How to Program Terk Universal Remote with Manual Method
The manual method of finding your code is easy to do: just type in the keycode in your remote instruction booklet, this will help to detect the make and model of your equipment. From there, the correct code is detected.
- Turn on your device, e.g. TV.
- Press the TV button on your Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided keycode in your remote’s instruction manual.
- After that, point the remote control at your selected device and press and hold the power button.
- Release the power button as soon as the screen switches off.
How to Program Terk Universal Remote with Codes Search
The 3 digit code method is carried out by following the instructions below:
- Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Hold on the power button on your remote and press the channel up button until the device or TV turns off.
You now have lots of codes in your custody. You can test them all to see which will work with your universal remote.
If the codes didn’t work after proper application, then try the methods that are explained. You will be able to find the ideal code for your device.