Toshiba DVD Player Universal Remote Codes: This time, we are talking about Toshiba DVD Player Universal remote codes. Have you gotten your Toshiba Universal Remote and wish to program it so that it can work with both Toshiba DVD Player and other devices? Your answer is here. I am going to list out the codes that can work with your Toshiba DVD Player and also discuss the instructions you need to program the remote and the selected device together.
List of the Toshiba DVD Player Universal Remote Codes
There are lots of advantages when it comes to Toshiba Universal Remote codes for the DVD Player. It hands over lots of control to you and as such, you can operate every feature on your selected device. The codes are listed below:
How do you Program Toshiba DVD Universal Remote
The methods that are effective when programming your Toshiba DVD Universal Remote are explained in steps below. I have to make them be in simple steps so that you can follow them easily and then finally program your remote with the device of your choice. I often use TV in most of my examples in every method.
How to Program Toshiba DVD Universal Remote without Codes
The keycode method of programming your Toshiba DVD Universal Remote Control is provided in this section:
- Switch on your Device e.g. TV so you can operate it.
- Turn on your remote control and tap on the device button on it e.g. TV, DVC, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
- Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
- Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
- Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored
How to Program your Toshiba DVD Universal Remote—Manual Method
The manual method of pr0gramming your Toshiba DVD Player Universal Remote is as presented below:
- Turn on your device, e.g. TV.
- Press the TV button on your Toshiba DVD Player Universal Remote Control.
- Press and hold the setup button on your universal remote until you can see the flashlight to activate it to learning mode.
- Enter the provided keycode in your remote’s instruction manual.
- After that step above, point the remote to your TV and then press and hold the power button.
- Once the TV switches off, release the power button.
That method should work perfectly if you follow the instructions strictly. If the method does not eventually work, you can try the auto search method that I am about to present.
How to Program Toshiba DVD Universal Remote with Code Search
The code search method as discussed in the earlier articles, involves the scanning of the codes one after the other in the universal remote until the right code is detectable and used.
- Turn on your device to get it ready for programming.
- Turn on the remote control as well.
- Press and hold the setup button on your remote control
- Enter the unique 9 9 1 codes
- Hold on the power button on your remote and press the channel up button until the device or TV is turned off.
If you want to program other brands of Universal remote, you can always find the simple steps and methods on this website. You may also have some comments you want us to know about, kindly drop them in the comment box so that we may learn too.