Vizio Soundbar Universal Remote Codes & Program Instructions

Vizio Soundbar Universal Remote Codes & Program Instructions: If you are using the Vizio Soundbar and you need the Universal codes to program the remote to work with your favorite devices, I can assure you that the codes and program instructions we have here can go a long way to benefit your mission. You will be able to control your soundbar using the codes that will be released in no time.

5 Digit Universal Remote Codes for Vizio Sound Bar

• 1009
• 31517
• 32454
• 31975
• 11144

4 Digit Universal Remote Codes for Vizio Sound Bar

• 1517
• 0660
• 0883

Vizio Sound Bar Xfinity Remote Code

• 11758
• 11756
• 10864
• 10885
• 10178

I have some other important codes for you, they can work with the VB. They are VSB201, VHT215, S3821, VSB200, SB3820m, the codes have been tested on Comcast remote, Xfinity X5 remote, Uverse, U-Verse, S10-S3, Atlas 1056B03, and so on.

I have prepared some of the best code search methods you can use to program your remotes so that you can control your soundbar to your taste and these are the steps mentioned below:

Important Info: some of the soundbars are programmed to accept other IR to control them, thus, you can apply the TV IR into Vizio SB.

How to Program Vizio Soundbar Universal Remote Without Codes

Follow these instructions to program your soundbar without using remote codes. It is the auto search method that allows your remote to scan the entire code one after the other so that you can find the code that works with your remote.

• Switch on your Device e.g. TV so you can operate it.
• Turn on your remote control and tap on the device button on it e.g. TV, DVC, and so on for 3 seconds until an LED light blinks to indicate that your remote is ready to program.
• Point the Universal remote on the device and press the CH+ and CH- buttons. Your remote will show on and off signals. Press the up or down button continuously until your TV or the selected device turns off.
• Verify the code by clicking on the power button of your Universal Remote, if it starts up your device, try to change the channel to verify that the code is correctly programmed.
• Tap the device button to save your new code. If an LED light blinks twice, that means the code is now stored.

How to Program Vizio Soundbar Universal Remote With Manual Method

You can program your remote using the manual method that allows you to use the keycode in your instruction booklet which aids in searching for the make and model of your device or equipment.

The instructions are mentioned below:

• Turn on your device or TV in this case.
• Press the TV or device on your Vizio Soundbar Universal Remote control.
• Press and hold the setup button on your Universal Remote Control for Vizio Soundbar to see if the remote displays the Light Flash to indicate it is activated to the learning mode.
• Type the code collected from your remote’s instruction booklet.
• As soon as you are done with the immediate step above, point the remote at your TV and press and hold the power button.
• You should release the power button once the screen turns off.

How to Program Vizio Soundbar Universal Remote With Code Search Method

You can search for your remote codes using the unique 3 digit number that help in the search process. The programming instructions are explained below:

• Turn on your device first to get ready for the programming process.
• Press and hold the remote’s setup button.
• Enter the 3 digit code 9 9 1
• Hold down the power button and press the channel up until your TV turns off.

Key Fix Version FIOS

Perhaps, you have programmed your remote using any of the methods above perfectly but still realize that some keys like the Mute, VOL, or A/V aren’t working, apply the fix instructions below:

• Press and hold the OK button and * button together. The RED LED light will blink two times and then stays on.
• Press and hold any of the keys or buttons that are not working. The remote can try alternate codes for every 1 second.
• Anytime the device or TV responds correctly, release the key.
• Press OK to finally save the current settings.

U verse and Vizio Soundbar Remote Control Fix

• You can program your Vizio soundbar to your TV by using the 1009 code on the U verse remote control.
• Then use the auto-scan or manual code method to program your TV using the DVD Key on your remote.
• Press ATT and OK and then press 955 and press the TV button these actions will send Volume to the TV button on your remote.
• If you want to power off all at a go, press the ATT and the OK button and then release type 977, and press the ATT button again and then the DVD and TV buttons, and then press the Enter button.

The above methods are expected to work. If they didn’t work, leave a comment or two mentioning your remote model number and the soundbar model number to see if we can help with the correct code.